Virtual on sigtar.com

Docker - Running Ubiquiti NVR and Plex

Mon, 23 May 2016 00:00:00 +1200

Bye bye virtual machines and their inherent OS bloat. Docker and containerization is here…

The trick to containerization is picking the right workload (as with most things). Think about data, its state and where it lives and whether there are any benefits to running as a container.

Both Ubiquiti’s NVR and Plex’s media server software run’s some base application, this app within its own container then maps to data (which can exist outside the instance) that is consistent.

vmware - copy networking port groups to another host

Mon, 04 Feb 2013 00:00:00 +1300

You might be able to do this via “host profiles” but if you do not have the licensing for it, this is the alternative. Very handy if you have over 50 or so port groups. It can be re-run to add to additional hosts as needed.

Install powercli, run the following to obtain your current list of virtual port groups off existing host;

Get-VirtualPortGroup -VirtualSwitch vSwitch0 -VMHost esx-01

Grab the output and place into CSV file or copy straght into Excel…

hyper-v to esx conversion

Wed, 14 Apr 2010 00:00:00 +1200

V2V cold clone process for SBS / exchange / sql / DC’s etc….. (works in vSphere)

Steps to convert from hyper-v guest to vmware guest

Remove hyper-v integrated services while hyper-v guest is running. (if possible)
Note down NIC networking details first
Clean shutdown hyper-v guest
Use StarWind Converter (free) to convert VHD to “dynamically growing VMware” image and use “IDE” as type. Note “SCSI” does NOT work if you have not got the LSI / BUS drivers in the source image, just use the default options – dynamic vmware and IDE.
Create VMware guest shell (virtual machine equivalent to hyper-v specs but without the disks) – remove all hard drives, iscsi controller should also disappear.
Upload the VMDK to same data store as virtual machine and attach to the virtual guest in the right order. They should be detected as “IDE”
Start new vmware guest
If you could not remove integrated services (i.e. hot clone), then you MUST disable hyper-v services immediately.
Install vmware tools – reboot
Remove hidden NIC and other orphaned devices, and reconfigure network card as per original.
Windows may need to be re-activated - do this.

Note : converting a machine to use an IDE controller will limit its performance!

vmware - DVS

Tue, 12 Jan 2010 00:00:00 +1300

Here is a good presentation about vmwares DVS technology. Essentially a new way to create a vSwitch over a cluster and just add the required hosts into it.

http://download3.vmware.com/vdcos/demos/DVS_Demo_800x600.html

OpenSolaris - Headless server

Sun, 26 Jul 2009 00:00:00 +1200

I’ve moved from a CentOS linux distro running vmware server 2.0 to OpenSolaris running VirtualBox. My previous system was totally headless and i wanted something similar to replace it.

I’ve just started getting into OpenSolaris for many reasons (Sun has some cool stuff - ZFS / VirtualBox). But I have always wanted to run OpenSolaris as a headless server, and from what i initially found VirtualBox didn’t have the easy to use autostart on boot features that vmware server had. But there are always ways to get things working…

Opensolaris 2008.11 and xvm

Mon, 18 May 2009 00:00:00 +1200

I’ve been dabbling with virtual box up until this point. But have decided to take it to the next step by using xvm to run my virtual machines. I have taken a guide from BDerzhavets at this site : http://bderzhavets.blogspot.com/2008/12/xvm-on-opensolaris-2008.html

First step is to open package manager and find the “vitalization” grouping. Install everything in this group. You’ll probably find some packages are already installed.

Next you’ll need to add the xvm kernel to the grub startup menu (menu.1st). This bit is a bit of blind faith from my perspective - its a shame that the xvm kernel package doesn’t add itself to grub? Anyhow… You need to add the following as another boot option in the /rpool/boot/grub/menu.lst file;

VMware Server 2.0 - Infrastructure Client

Wed, 04 Feb 2009 00:00:00 +1300

One thing i like about vmware server 2.0, is that you are not forced to use the web console in all cases.

If you are lucky enough to have access to VMware Infrastructure Client 2.5 you can connect via it using the following syntax at the logon screen;

IP address / Name : http://192.168.9.100

If you enter a URL in the host field, use your root and correct password you should be able to logon without issue. Welcome to a nice fast GUI admin console.

Virtual Appliance - Virtual Router

Mon, 02 Feb 2009 00:00:00 +1300

This is quite a handy app for creating small virtual routers. See the website for more detail… The commandline is similar to cisco - so its good for practice if you are going for your CCNA.

http://www.vyatta.com/products/virtualized.php

Oh - its open source and free!

I’m a bit lazy in most cases and just add a few virtual nics into my VM’s and do the routing though them. But some people may find this handy for a single point to manage networking.

VMWare - Converter Best Practices (p2v)

Mon, 02 Feb 2009 00:00:00 +1300

I found this on the web a while back, it sums up most of what you need to know before doing any P2V work (this generally talks about a windows physical to virtual conversion)….

http://www.vmware-tsx.com/download.php?asset_id=48

Converter Best Practices

What should I do after I successfully convert my virtual machine?

If you change from a multi-processor system to a uni-processor system you need to manually change the HAL on the Windows server after the conversion. To do this go into Device Manager after the machine first boots and discovers it’s new hardware and then click on Computer then right-click on the processor and select Update Driver. Then select Install from specific location and then Don’t search I will choose the driver to install. Then select show All compatible hardware and select the appropriate processor. For example, if you went from a dual cpu to a single cpu then select ACPI uni-processor PC instead of ACPI multi-processor PC. You will need to reboot once you change this. To verify what HAL you are using you right-click your hal.dll in c:\windows\system32 and select the Version tab and select Internal Name and it should say halmacpi.dll for multi-processor acpi and halacpi.dll for uni-processor acpi.

Next clean up all the non-present hardware after the P2V conversion. To do this go to a CMD prompt and type;

SET DEVMGR_SHOW_NONPRESENT_DEVICES=1

DEVMGMT.MSC

then select Show Hidden Devices. Delete any old grayed out hardware. Next remove any vendor specific applications/drivers. For example on a HP server you should go to Add/Remove programs and remove any HP management agents, survey utility, array config utility, version control agent, etc. Also check your NIC and make sure there are no vendor specific drivers there (ie. teaming). Check the Services to see if all there is anything vendor specific related there and disable any services that are.

VMWare Performance tips

Mon, 02 Feb 2009 00:00:00 +1300

these are tested from experience…. (the following is true on vmware server 1.0.6 on a linux host)

Always use only 1 Virtual CPU - i have found that most times even if you have heaps of cores to spare on the host, a single virtual core is faster.
Set the memory to the recommended level when possible - 256Mb sounds shit when you have 4gb, doesn’t matter - set it to 256Mb (increase only if excessive paging on the guest). Let linux and vmware manage the memory, in most cases it does a much better job than windows. Do not disable memory page trimming on any of the guests, this gives more memory back to the host to cache other more important activity (disk etc)
Never use 2gb split files for the virtual disk unless you have to transfer the vm onto a file system that doesn’t support larger files.
Load the latest drivers for your NIC on the host
Be nice to your physical disk - do not load all your VM’s on a single drive - the HDD is the slowest part of the system, dont saturate it. I use either a raid 0 running multiple vm’s (with backups) or dedicated drives per set of vm’s. This excludes enterprise level raids which can handle much higher level of simultaneous requests.
Install vmware tools on all guest machines

watch your pings - ping your guests… they should never loose a ping. If they do you are loading the cpu to high and the host cannot process the network queries. As above use only one virtual cpu. Also ensure you have the latest network driver loaded for your NIC on the host.