If you run UNRAID at home and you have a UniFi Camera system then check out my latest container….

https://hub.docker.com/r/superd/unifi-nvr/

A dockerised UniFi NVR

Ubiquiti UniFi-Video-Controller (NVR) – Docker Container

Ubuntu 16.04, UniFi-Video-Controller 3.8.3

Setup / Quick Start

docker run \
--net=host \
-v /var/lib/unifi-video/:<YOUR DATA DIR> \
-v /var/log/unifi-video/:<YOUR LOG DIR> \
superd/unifi-nvr

Troubleshooting

UNRAID - If you have issue with MongoDB continually restarting please check your data mapping. I have seen issues where user shares do not work correctly. Please try mapping direct to a single disk or to cache drive to ensure smooth operation.

i.e. instead of /mnt/user/usershare/nvr/data  use  /mnt/disk1/usershare/nvr/data

Update 4/02/2020 ;

I would recommend using this docker image - https://hub.docker.com/r/pducharme/unifi-video-controller/ 

I have found that i no longer require a direct disk mapping as stated above, the built in DB seems to work fine on user shares. Unraid 6.8.2 

New Commandline as per follows; 

docker create --name='unifi-video-controller' --net='host' -e TZ="Pacific/Auckland" -e HOST_OS="Unraid" -e 'PUID'='99' -e 'PGID'='100' -v '/mnt/user/appdata-unifi/unifi-video/':'/var/lib/unifi-video':'rw' -v '/mnt/user/appdata-unifi/unifi-video/videos/':'/usr/lib/unifi-video/data/videos':'rw' 'pducharme/unifi-video-controller' 

I use ‘host’ network mappings just as there are a ton of ports and i’m lazy - use bridge ports if you want to reduce footprint.