Ide

vmware : IDE to SCSI

Virtual

I’ve found that vmware converter (this may be fixed in newer verions) creates vmware guests with an IDE controller. There can be performance issues if you choose to remain with this particular controller… Best bet is to change it to one of the various vmware SCSI controllers…

Depending on which windows operating system you are running depends on which controller you use….  http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006621

Guest Operating System Adapter Type
Windows 2003, 2008, Vista lsilogic
Windows NT, 2000, XP buslogic
Linux lsilogic

 

hyper-v to esx conversion

Virtual

V2V cold clone process for SBS / exchange / sql / DC’s etc…..    (works in vSphere)

Steps to convert from hyper-v guest to vmware guest

  • Remove hyper-v integrated services while hyper-v guest is running. (if possible)
  • Note down NIC networking details first
  • Clean shutdown hyper-v guest
  • Use StarWind Converter (free) to convert VHD to “dynamically growing VMware” image and use “IDE” as type. Note “SCSI” does NOT work if you have not got the LSI / BUS drivers in the source image, just use the default options – dynamic vmware and IDE.
  • Create VMware guest shell (virtual machine equivalent to hyper-v specs but without the disks) – remove all hard drives, iscsi controller should also disappear.
  • Upload the VMDK to same data store as virtual machine and attach to the virtual guest in the right order. They should be detected as “IDE”
  • Start new vmware guest
  • If you could not remove integrated services (i.e. hot clone), then you MUST disable hyper-v services immediately.
  • Install vmware tools – reboot
  • Remove hidden NIC and other orphaned devices, and reconfigure network card as per original.
  • Windows may need to be re-activated - do this.

Note : converting a machine to use an IDE controller will limit its performance!