If you run UNRAID at home and you have a UniFi Camera system then check out my latest container….

https://hub.docker.com/r/superd/unifi-nvr/

A dockerised UniFi NVR

Ubiquiti UniFi-Video-Controller (NVR) – Docker Container

Ubuntu 16.04, UniFi-Video-Controller 3.8.3

Setup / Quick Start

docker run \
--net=host \
-v /var/lib/unifi-video/:<YOUR DATA DIR> \
-v /var/log/unifi-video/:<YOUR LOG DIR> \
superd/unifi-nvr

Troubleshooting

UNRAID - If you have issue with MongoDB continually restarting please check your data mapping. I have seen issues where user shares do not work correctly. Please try mapping direct to a single disk or to cache drive to ensure smooth operation.

I’ve tried using a share for time machine before, but due to the nature of how time machine works it eventually consumed all the spare space that is available on that particular share.

bring on zfs quotas… (my drive on my mini mac is 100GB, so 200GB should be enough for a few variations)

zfs set quota=200G unprotected/timemachine

This adds a artificial limit to your zfs filesystem, making sure that time machine does not consume more than 200 gigabytes of space.

I have done most of the explaining in another post on how the permissions work with a zfs cifs share - link here.

In this post I’m going to show an example of how to add multiple groups / users to a specific folder. Which then recursively adds its ACL’’s to any child objects. Its essentially like the other commands i used, but with an extra line per user or group you want to configure; 

O.k. from this  point I’m assuming you have created your zfs shares via the zfs command and renamed appropriately like so…..   (if you havent setup cifs yet then check read this)

zfs set sharesmb=on protected/backup

zfs set sharesmb=name=backup protected/backup

Now to check your current shares type…

sharemgr show

zfs

zfs/protected/backup backup=/protected/backup

zfs/protected/photos photos=/protected/photos

Now its time to look at NFSv4 ACL’s. This page has a great explanation of ACL’s and how to set things up. http://cuddletech.com/blog/pivot/entry.php?id=939